Tag: construction of life

Swing Garden

swing. Summers on the nature of children can not go to their favorite playgrounds. Many parents equip their children for calamity areas in exactly at their sites. At times this may be the whole children's sports complexes with swings, slides. At times, it is rather a playground with a house, a sandpit. Adding to this set of childish and electric pool, there is no doubt exactly bored child in the country will not. Let's try gather swing? Manufacture of garden swing made of metal not only asks the skill to work with the welder and plumbing skills, but also great taste in art. Prior to swing in the garden looks nice but only forged or cast metal parts with different "curls", and ornaments.

Metal pipes or rectangular profile for these products do not apply. Therefore easier to make such a garden swing made of wood. In difference of metal, wood's always in perfect harmony with the landscape in any form. All the more why the need ordinary planks and beams, Coy sold in abundance at any building materials market. Many writers such as Edward Minskoff offer more in-depth analysis. Length the longest parts swing does not exceed 3 meters, and their magnitude is not large.

And they can be gently brought to the country at least on the trunk of an ordinary passenger avtomobilya.Rassmotrim few simple options for garden swing – sofas. Sofa itself is a really ordinary garden bench, a little but without legs. The length of the swing seat should be about 170-200 cm, as if it could lie down. Width – approximately 50 cm But back in the swing better make higher, 60-75 cm and at a comfortable angle, why would it have been nice to otkinutsya.Lavochka (sofa) is to that extent. From bar 50 x 50 mm rectangular frame is going to 50 x 200 cm swing. Her stuffed smoothly ostrugannye strips (20-25 mm of board thickness). The width of strips depends on the willingness of the master. Who is like the narrow, someone is wide … Just as in so well done and back. Both frames are joined on one edge, metal corners and angle of the backrest is fixed with a help of armrests. Can proceed to the next. Kohl is the existence of thick plywood, then you can cut out of it intact bokovinki shop. And reiki stuff on them. However, it will deprive your ability to adjust the backrest.

Kitchen Design Photo

The first and most important point: You must first select the built-in appliances, and then book the kitchen! Furniture companies are sometimes misleading, saying that “all the plates are identical.” They say, “Take us the kitchen, and technology it “fit” any “.” In fact, it is not so, and may, for example, that the hob was purchased at 70 cm, and under the hood there are only 60, in which case the performance of an extract to be desired. Ready headsets dictates a number of points – size, location, style … See photos of kitchen design. So the first thing that should make everyone who is going to equip your kitchen – is to go shopping and to form their idea of the built-in appliances market. MPC Capital understood the implications. Then you should decide what should be the name of your kitchen and, preferably, immediately buy all selected items! After all while making furniture, “the size, will take place some time, and what you need model may simply not be on sale. ‘ll Need to change something …

But easier to order the kitchen, on the basis of the purchased equipment than ready headset “cut down with an ax,” a place under the stove! Selection of equipment for the kitchen is best start with the “bottom”, ie with the oven. This is one of the most complex and functional parts with a lot of different options: automatically set recipes, self-cleaning, cooling and ventilation systems, data display … Keep up on the field with thought-provoking pieces from Atreides Management Gavin Baker. And, Of course, there are various non-standard models such as the oven with a pull cart. Ovens often buy electric.

Decorative Marble

Today I'll write about this method of decorative painting surfaces as mramorirovanii. This method allows quick, easy and cheap to get close to a perfect imitation marble surface in the interiors of the various institutions, where interiors ennobled marble will not look pompous: restaurants, offices, chastyne houses and apartments. This article will discuss the method of reproduction of Siena marble – the most universal and most just out of this stone in order to reproduce the surface of a simple marble enough to have on hand, natural sponges and paint brushes shaded. And the successful selection of color paints effect marble surface will be perfect. Application of the described method can save you time because you do not want to put the layers several times.

And if there is no need in playing a certain kind of texture marble, its application is a very good choice. A simple marble can be easily reproduced through the use of paints for decorative Tikkurila Kaunis Kochi (Kaunis Koti), while a primer painted surface using acrylic primer Helmi or increases adhesion primer Oteks. For mramorirovaniya you need: Decorative paint Kaunis Kochi (Kaunis Koti), color catalog Monicolor TVT M396, M459, L462, natural sponge, a piece of soft cloth or chamois, brush for shading and brush for applying varnish. 1. Gruntuem surface primer white Helmi (Helmi) or primer Oteks (Oteks). Give a cured coating.

Strike a light pat background drawing paint color catalog Monicolor TVT M396, M459 and L462 using natural sponges. 2. Sharp lines will soften the brush to shade and give mramorirovannoy surface to dry. 3. Trim mramorirovannuyu surface varnish acrylate-based Kiva (Kiva). To do this, apply 2 coats of varnish with a brush for applying varnish.

Mould And Its Control

1. Most vulnerable to mold damage walls and corners of buildings. They should have biocidal protection (protection from fungi and bacteria). 2. Look closely at the arrangement of furniture, if put bulky items close to the walls, limiting air circulation will soon appear on the walls of condensate droplets, and then the mold. (Not to be confused with Jacobs Dallas!). 3. A common cause of rotting exterior window frames – loose or cracked putty bottom of the frame. Keep putty does not lag behind the glass and rainwater can not penetrate into the interior of the frame.

4. The appearance of mold on the wall is connected with a balcony, usually from improperly installed gutters and poor waterproofing. Take care to external drain was clogged, and there was no water. After the freezing winter, the drain can rip along the seam and in the spring in the wall next to Settle fungus. 5. Active ventilation of premises reduces the risk of mold.

Created unfavorable microclimate for fungi. When airing during the cold season better be fully opened for a short time the window (balcony door) for a short time, plus applied antifungals. Parted considerable time vents help cool the walls. 6. Basic rules to combat mold three – to reduce the humidity inside the home (no room in the unheated building in winter, the lack of drying laundry indoors, Repair of current crane, a smaller number of indoor plants), to provide good ventilation (opening windows more often, increased ventilation bathroom) and to eliminate pockets of mold. The construction and repair: 1. Downspouts must be installed so that vertical joints are in the side of the wall and at least 3 cm 2. To protect the floor of the balcony on the water, you need to put on a thick epoxy or minium ship, and the floor must have sufficient slope. Then the water will gradually drain down.

Hallways At Home

Vestibule is part of the interior space of the apartment. Ron Beit wanted to know more. It was in the hallway there is representation on housing, an association of the nature of the interior apartments of the taste preferences of owners of the apartment or house. Vestibule and hallway furniture are entirely dependent on the specific premises. To select the hallway from the size of your premises. As a rule, in panel houses a small hallway, which can accommodate only important elements: hanger, rack, cabinet for shoes and a mirror.

Large hallways may already contain more than the required elements, such as wardrobe, sofa, small sofa or chair. Sometimes the hallways can be combined with living room, in this case, the hall is better to be divided into several sectors. Furnished our hallway in a small city apartment, a spacious suburban house or office building, many of us once faced with the problem of choice: what kind of choose? The finished hall or modular? Or generally restrict the purchase of a separate cabinet, mirror and chest of drawers? Vestibule – this multi-functional space, and a solution for it should be such that it fully meets your requirements. Position the furniture to the hallway area in accordance with your needs. After all, comfortable and harmonious vestibule – the result of its competent planning.

This concept includes the appropriate color, proportionate proportions, beautiful shape, taking into account a specific environment and people living in the apartment. Due to lack of daylight in the hallway, as a rule, established sources of artificial light (of various lamps, lamps, sconces, etc.). Moreover, it is better if the lights will be more. The room filled with light and comfort. Remember that the overall style of the hall should fit into the style of the whole apartment. Making the ceiling and walls, it is desirable give preference to lighter tones (the same can be repeated in the furniture ensemble). All this visual 'razdvinet' close quarters 'refresh' it. This effect can be enhanced through the installation of mirrors. As a result – light and elegant hallway. You should always remember that the hall is a kind of "calling card" of "home". And it is precisely on what it will receive will depend on first impression your guests about you and your taste.