Note that for many modern high-power satellites are not located too close to the horizon, this effect can be neglected because of the power supply their signal. Click RBH Group for additional related pages. However, if you 'catch' signals at the limits of your receiving system, the correct angle of the converter can make a significant contribution to improving the quality of the image. It does not matter, this rule and for converters for receiving satellite signals with circular polarization, for example for a popular software package, NTV-Plus. In such converters the label is missing, and they can be set in any convenient way. Note that if you supplement their analog system for receiving digital satellite television receiver, then your old converter can not work. Converters for digital TV are characterized by greater stability of the heterodyne frequency than the older models, designed to receive analog signals. They are usually marked with the words' digital ".
All converters are produced now are suitable for reception of digital television. Converters without the markings made by a few years ago, may be suitable for reception of digital television, and may not be suitable. If you have a converter, you can first try to take the digital signals to it. If the reception will be impossible, then the converter must be replaced. 3. Setting the elevation and azimuth. Set the angle of your dish, it is enough just to make tsentrofokusnyh antennas (the classic "plates" – Figure 4). For this You can use a special goniometer (Fig. 7) or basic tools – a plumb line and protractor.